بازیافت پلیمرهای تقویت شده با الیاف

Current status of recycling of fibre reinforced polymers:

Review of technologies, reuse and resulting properties

وضعیت فعلی بازیافت پلیمرهای تقویت شده با الیاف:

مروری بر روش‎ها، استفاده‎ی مجدد و خواص نهایی

ABSTRACT

A complete review of the different techniques that have been developed to recycle fibre reinforced polymers is presented. The review also focuses on the reuse of valuable products recovered by different techniques, in particular the way that fibres have been reincorporated into new materials or applications and the main technological issues encountered. Recycled glass fibres can replace small amounts of virgin fibres in products but not at high enough concentrations to make their recycling economically and environmentally viable, if for example, thermolysis or solvolysis is used. Reclaimed carbon fibres from high-technology applications cannot be reincorporated in the same applications from which they were recovered, so new appropriate applications have to be developed in order to reuse the fibres. Materials incorporating recycled fibres exhibit specific mechanical properties because of the particular characteristics imparted by the fibres. The development of specific standards is therefore necessary, as well as efforts in the development of solutions that enable reusers to benefit from their reinforcement potential. The recovery and reuse of valuable products from resins are also considered, but also the development of recyclable thermoset resins. Finally, the economic and environmental aspects of recycling composite materials, based on Life Cycle Assessment, are discussed.

 

مواد سرامیکی و پلیمری دارای مواد رسانا

Conductor-Loaded Polymeric and ceramic Material

مواد سرامیکی و پلیمری دارای مواد رسانا (دارای ذرات تقویت کننده رسانا)

ABSTRACT

Conductor-filled polymers and ceramic are specific subsets of the conductor-Loaded dielectrics . The primary reason for adding conducting particles in polymers plastics or ceramics is to enhance the electrical conductance of the medium . In general polymers and ceramics when loaded with conductors become very good conductors of electricity and are useful in a wide range of electromagnetic applications. However inclusion of a metallic constituent in a polymer matrix may affect the low density and high strength or impact resistance properties of the plastics or the ceramics .