جوشکاری GTAW آلیاژ آلومینیوم تیتانیوم

Effect of Vibration during GTAW Welding on Microstructure and Mechanical Properties of Ti6Al4V

تاثیر ارتعاش در طی جوشکاری GTAW روی ریزساختار و خواص مکانیکی Ti6Al4V 

ABSTRACT

The drive to improve weld quality and process parameters demands the use of improved welding tech niques and materials [1]. Titanium and its alloys are considered to be the best engineering metals for indus trial applications because of their excellent strengthto weight ratio, high fatigue life, toughness, resistance to corrosion and good fatigue strength [2, 3].

Welding methods such as gas tungsten arc, resis tance, and diffusion welding have been developed in response to the expansion of the titanium industry. 

Titanium alloys easily absorb harmful gases because of their high chemical activity, resulting in poor mechanical properties and unstable structure [4, 5]. Gas tungsten arc welding is the preferred method for avoiding these deficiencies [6]. The weld ing of titanium alloys often increases grain size in the welded metal and heat affected zones [7]. Fusion zones typically exhibit coarse columnar grains in response to prevailing thermal conditions during welded metal solidification [6]. These columnar grains produce inferior mechanical properties in the welds [1]. Methods of weld grain refinement include inocu with heterogeneous nucleants, surface nucleation induced by gas impingement, introduction of physical disturbance through techniques such as elec tromagnetic stirring [4]. Vibratory techniques, and pulsed current welding techniques [8].

ماشین کاری تیتانیوم و آلیاژهای آن

MACHINING TITANIUM AND ITS ALLOYS

ماشین کاری تیتانیوم و آلیاژهای آن 

ABSTRACT

Titanium and its alloys are attractive materials due to their unique high strength-weight ratio that is maintained at elevated temperatures and their exceptional corrosion resistance. The major application of titanium has been in the aerospace industry. However, the focus shift of market trends from military to commercial and aerospace to industry has also been reported. On the other hand, titanium and its alloys are notorious for their poor thermal properties and are classified as difficult-to-machine materials. These properties limit the use of these materials especially in the commercial markets where cost is much more of a factor than in aerospace. Machining is an important manufacturing process because it is almost always involved if precision is required and is the most cost effective process for small volume production. This paper reviews the machining of titanium and its alloys and proposes potential research issue .